Celsi GL2029US Specifikace stáhnout pdf (Strana 6)

3.EF.40.Rev. 1.0 6

Install your heater：

z Respectively loosen the two screws of the wall mounting bracket on the top of appliance with

a screwdriver, Then take out the wall mounting bracket (see fig.1)

z Choose a solid and plain wall and then put the mounting bracket on the position where you

want to install the heater. Mark the 4 holes with a pen through the holes on the mounting

bracket. (Fig. 2) – Ensure that the bracket is level using a spirit level or similar.

z Take away the mounting bracket and then drill 4pcs Φ8 holes on the wall. Put the plastic wall

plug into the hole. (Fig. 3) If the wall is solid wood, there is no need to drill the holes on the

wood and no need for the plastic wall plugs.

z Fix the mounting bracket by 4pcs M5×8 screws (Fig. 4)

z Hang the heater on the hooks at bottom and push the heater into the mounting bracket and

then fix it using the 2pcs M5×8 screws. (Fig. 5) (These were removed in step 1)

z Install the heater front fascia as in the picture. (Fig. 6)

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Žádné komentáře

Celsi GL2029US Specifikace Strana 6